43T Laboratory Filters

Stainless Steel Laboratory Filter

The 43T Series Laboratory Filters are for use in laboratories to perform filtration trials and scalability studies. These units are constructed of 316 stainless steel with stainless steel cylinders for pressures up to 50 PSIG, or a protected Pyrex® glass cylinder for filtration up to 30 PSIG. Stainless steel cylinders can be furnished with an optional heating or cooling jacket.

When running trials, which require more than one filtration stage, ErtelAlsop offer Laboratory Filters with an optional dividing flange. This option can be supplied with the filter or at a later date without any modifications to the original system. This design allows for an infinite number of filtration stages.

Small constant flow pumps, compressed air or inert gas can be used to flow liquid through the filter media. The O-Ring seal provides the versatility to use a variety of filter media of different composition and thickness.

Request Pricing
Standard FeaturesOptional FeaturesSpecificationsDownloads
    • Stainless Steel Cylinder (Model 43T)
    • Pressure Gauge
    • EPDM Elastomer
    • Stainless Steel Mounting Stand
  • Pyrex Glass Cylinder (Model 43TP)
  • Heating or Cooling Jacket (Model 43TJ)
  • Single Sheet / No Reservoir (Model 43TS)
  • Sanitary Connections
  • Dividing Flanges
  • Tubing and Pumps
  • Elastomer Matierial – Teflon, Neoprene, Viton, Buna, Silicone
Specs. 43TS 43TP 43T 43TJ
Material 316 L 316 L / Pyrex 316 L 316 L
Gasket Material EPDM EPDM EPDM EPDM
Pressure Limit 50 PSI 30 PSI 50 PSI 50 PSI
Jacket Pressure N/A N/A N/A 30 PSI
Media Type Any Flat Any Flat Any Flat Any Flat
Media Diameter 200 mm (7.87 in) 200 mm (7.87 in) 200 mm (7.87 in) 200 mm (7.87 in)
Filter Area 277 cm2 (43 in2) 277 cm2 (43 in2) 277 cm2 (43 in2) 277 cm2 (43 in2)
Volume 400 ml (24 in3) 8 l (488 in3) 8 l (488 in3) 8 l (488 in3)
Gauge None 0 – 2.5 Bar 0 – 2.5 Bar 0 – 2.5 Bar
*All dimensions are for reference only