Biomass Filter Press

 

Biomass Filter Press

The ErtelAlsop Biomass Filter Press System is used for filtration of biomass batches up to 500 Lb. It provides a closed-loop solution for maximum solvent recovery and efficient biomass separation.  Membrane squeeze units are also available for added mechanical compression of biomass averaging 5% additional solvent recovery.

Our  products have been proudly manufactured in the USA for over 90 years.

Available Units:

20 Cu Ft Press
  • Will process approximately 400-500 lb batches of Biomass

As with all ErtelAlsop plate and frame filter press models,  optional features are available for many applications and operating environments.

Request Pricing   Learn More About Pre-Coat & Body Feed
Standard FeaturesOptional FeaturesSpecificationsDownloads
  • High Strength Carbon Steel Skeleton
  • Chemically Resistant Painted Framework
  • 304 Stainless Steel Side Bar Wear Strips
  • Caulk & Gasketed Recessed Polypropylene Plates
  • Thorough Wash Capability
  • Feed Pressure: up to 100 PSI
  • Manifold: Connects the four corner outlets to a single discharge point. Piping schedule 40 316SS with Tri-Clamp Connections. Manifold includes manual ball control valves allowing uniform filling during the fast fill process, and a compressed air inlet valve connection for chamber blow-down
  • Hydraulic Closure: Air over oil driven hydraulic system with a double acting hydraulic cylinder and piston feed. Controls and hydraulic components contained in NEMA-12 control cabinet with panel mounted oil and air pressure gages and a selector switch for “Off”, “Open” and “Close”
  • Area Classification: Class 1 Division 1 and 2 Compliant (C1D1 and C1D2)
    • Validation package available for GMP facilities
    • Pre-Coat Tank
      • 250-Gallon high-density polypropylene cone-bottom cylindrical tank
      • Single piece rotationally molded
      • FDA approved
      • Highly chemical resistant
      • Sturdy carbon steel stand with mixer bracket
          • Flanged 5″ X 5″ feet with 13/16″ diameter mounting holes
          • Reinforced legs
          • Formed rim around the perimeter of tank bottom
    • 14 gage stainless steel drip pan with a 1/2″ valved drain outlet
    • Self-dumping Cake Carts fabricated from carbon steel and coated with chemically resistant paint equipped with forklift rails and casters for easy handling
    • Polypropylene blanking/support plate for use when reducing solids capacity
    • Field service for Start-up, Commissioning, and Training: $1250 USD per Work and Travel days per service technician plus documented travel expenses
    • Plate size: 800 x 800 mm
    • Capacity: 1 to 20 cubic feet
    • Filter Surface Area: 20 to 415 square feet
    • Dimensions: 182″L x 41″W x 68″H
    • Filter Plates: FDA Polypropylene Caulk and Gasketed Recessed Chamber Filter plates with thoroughwash porting. Standard Gasket material is EPDM.
    • Filter Cloth: FDA Polypropylene filter cloth, pre-installed onto filter plates
    • Optional Feed Pump: 2″ FDA Compliant 316SS Air Operated Double Diaphragm Pump
        • Stainless Steel Wetted Path Material
        • Tri-Clamp Connections
        • Santoprene Diaphragms
        • Hytrel Ball Valves
        • -40°F to 225°F Operation
        • 150gpm Max Flow Capacity