ErtelAlsop mixers feature a modular design agitator based on over 80 years experience in liquid blending and processing. Hy-Speed® mixers are used in pharmaceutical, chemical, cosmetic, electric utility and food and beverage markets for continuous or batch operations. Our exclusive construction allows interchangeability of components such as electric and air driven motors, gear trains, mounting brackets, saddle plates, shafts and propellers. It provides our users with an almost infinite choice of final design to match the mixer to the application at the lowest possible cost.

Sizes range from ¼ to 3 horsepower and meet requirements for blending light liquids below 500 CPS as well as viscous fluids up to 10,000 CPS; many powders, pulps and fibrous materials can also be blended economically with ErtelAlsop modular mixers.

Hy-Speed® mixers can be added to an existing system or supplied as a Combination Processing Unit (CPU). The CPU is a portable processing plant and can include a batch tank, mixer, pump and filter. You can agitate your liquid and allow for filtration/separation of liquids after blending compounds. Various models of filters, agitators and tanks are available for your specific application.
Back to Top

Portable and Fixed Mount Units
Specifications
Applications: up to 10,000 gallons
Horsepower range: 1/4 through 3 HP
Speeds: Direct Drive 1140 and 1725 RPM
Speeds: Gear Drive 285 and 430 RPM

Options:

• Material of Construction
• Wetted parts
• Coatings
• Variable speed: SCR control, Variable Frequency, and Mechanical
• Impeller design
• Angle risers
• ASME flange seal
• Stuffing box
• Vapor seal
• Mechanical seal: lubricated or dry running<
• "C" Clamp
• Saddle Plate

• Efficient, totally enclosed or explosion proof motors and air motors.
• Special options available
• Industry standard motors
• Heavy cast aluminum housing and gear case
• Helical gearing, NEMA rating 10
• Sealed grease lubricated gear head
• Oversized, permanently sealed and lubricated
• Broad selection of Direct and Gear driven models
• Economy Models
• Specifications

• Applications: up to 300 Gallons
• Horsepower range: 1/4 through 1 HP
• Speed: 1140 and 1725 RPM
• Mounting: "C" clamp or saddle plate

Back to Top

Turbine Mixers

Each mixer is designed and manufactured for your application using only the highest quality components that are engineered specifically for dependable mixer service. XCEL-3 to 10 Series mixers are available with pumping rates up to 54,000 GPM and utilize standard industry motors up to 25 HP.

Typical applications include oil mixing in food storage and flocculation in water treatment.

Specifications:

HP Ratings: Up to 25 HP
Speed Range: 2 to 350 RPM output
Motor: NEMA C-Face in TEFC
Gear Drive: Worm and Helical/worm configurations
Pumping Rates: up to 54,000 GPM
Impeller: Hydrofoil for highest efficiency
Shaft: up to 240" long without a steady bearing
Mounting: Baseplate or flange mount
Options:

• Drywell to prevent oil leakage
• Stuffing box, mechanical seal, and lip seal on closed tanks
• Polished shaft and turbine for sanitary applications
• Variable speed controls
• PVC and PVDF coating for corrosive applications
• Axial, radial, and MB/A impellers for specific applications
• Explosion proof, chem duty, air, and high efficiency motors
• High and low speed couplings
• 100% Unconditional Extended Guarantee

Features:

• Heavy duty industrial components
• Low profile cast iron gear drive with multiple speed ratios
• Highest pumping rates in the industry
• Solid shafting in a wide range of metals
• Extended bearing and gear life for 100,000 hrs.
• Optional impeller configurations available.

Back to Top

Side Entering Units

Features:

• Well suited for use in large tanks
• Applications where headroom is lacking
• For use in tanks too deep for top entering units
• Used for blending, heat transfer and dispersion of suspended solids
• For fluids with viscosities to 10,000 CPS

Back to Top

Inline Static Mixers

Specifications:
Line Size: Up to 48" diameter
Elements: 2-18
Flow Rate: Up to 55,000 GPM
Viscosity: Up to 100,000 CPS
Pressure: Up to 1,500 PSI
Head: Lowest head loss in the industry
Options:

• Heavy or light pipe walls
• Threaded or weld-prep end connections
• Pipe jackets for heat transfer
• Injection nozzles
• Sanitary fittings and finishes
• Hydrotesting, x-ray testing and pickling
• ASTM code stamp
• Material certificates, welding procedures, welder's qualifications
• Special paints

Features:

• Designed to blend, disperse, react or shear two or more fluids within a short length of piping
• Three different element configurations for process optimization
• Materials of construction in most metals and non-metals, including FRP and PVC
• Standard wall pipe housing
• ANSI flange connections